
Size: 110mm x 105mm x 155mm
Material: Natural resin

Size: 50mm x 45mm x 35mm
Material: Transparent resin

Size: 50mm x 55mm x 105mm
Material: Temperature resistant resin
Stereolithography (SLA)
Overview: Stereolithography (SLA) is a 3D printing process that utilises a UV laser to cure a photopolymer resin layer-by-layer. The distance between each layer is referred to as the ‘resolution’. The higher the resolution, the higher the number of layers and the better the surface finish of the part. SLA is able to produces parts at a much higher resolution than FDM. This results in excellent surface finish and the ability to print small details at a high level of accuracy.
Materials: High-temperature resin (suitable for up to 180°C) and transparent resin*
*Transparent resin has a milky/semi-transparent appearance, but can be polished to achieve near full transparency.
Colours: Skin-tone or transparent (as shown in photos). Sanding, priming and painting services are available.
Common applications: Dental, medical, jewellery, injection-mould like prototypes
Is SLA right for my project: SLA should be used for producing parts with high curvature or with small, intricate details. SLA will result in a better surface finish than FDM, and layer lines will be nearly invisible. SLA is more expensive than FDM and parts will be less strong and durable.
Should I consider FDM: FDM should be used when function and cost are more important than surface finish. FDM can create strong and functional parts in a range of engineering plastics. Layer lines will be visible on a part produced by FDM, these will be more noticeable in areas of high curvature. Check out our FDM Printing Service page for more details.
Get in touch to tell us a little bit about your project and we’ll be happy to offer fast and free advice.